Formula summary
Percentage = CG × 10
Use the published Thapar Institute of Engineering and Technology conversion rule. Under this formula, 60% is roughly 6.00 CGPA.
Official Formula Summary
Thapar Institute of Engineering and Technology (TIET), Patiala uses Cumulative Grade (CG), equivalent to CGPA at other universities. CG to percentage formula: Percentage = CG × 10. Example: 8.0 CG = 80%. For GATE eligibility (60%): minimum CG 6.0. Note: Thapar students must use 'CG' (not CGPA) in all official documents — it is Thapar's internal terminology. For PSU GATE recruitment (65%): minimum CG 6.5 at Thapar.
PrepStack Tool
Convert your CGPA to percentage using the Thapar Institute of Engineering and Technology formula. Enter semester-wise SGPA and get your result instantly.
Formula: Percentage = CG × 10. 60% is roughly 6.00 CGPA for Thapar Institute of Engineering and Technology.
Percentage = CG × 10Enter SGPA per semester. Leave blank to skip.
Thapar Institute of Engineering and Technology students commonly need percentage conversion for campus placement forms, recruiter cutoffs, and document verification. A 60% benchmark is approximately 6.00 CGPA under CG × 10.
| Company / Category | Min % Required | Min CGPA | Note |
|---|---|---|---|
| Campus placements | 60% | 6.00 | Common mass recruiter screening benchmark |
| GATE / postgraduate admissions | 55% | 5.50 | Common qualifying-degree benchmark |
| PSU GATE recruitment | 65% | 6.50 | Check the current recruitment notice |
| Classification | Percentage | CGPA Range |
|---|---|---|
| Distinction / Outstanding | 75%+ | 7.50+ |
| First Class | 60–74.9% | 6.00 – 7.49 |
| Second Class | 55–59.9% | 5.50 – 5.99 |
| Pass Class | 50–54.9% | 5.00 – 5.49 |
| GATE Eligible (General — 55%+) | 55%+ | 5.50+ |
| PSU GATE — ONGC / NTPC / BHEL (65%+) | 65%+ | 6.50+ |
To get a Thapar Institute of Engineering and Technology CGPA to percentage conversion certificate: contact the examination section or your affiliated college registrar with a written request. Include your registration number, programme name, and batch year. Request explicit citation of the university formula: CG × 10. Most employers and government agencies accept this letter alongside your official transcript.
Chandigarh University, LPU, and PTU use × 10. Thapar uses CG × 10 (same result, internal terminology is CG). HPTU uses × 9.5.
Written by PrepStack Editorial Team
Editorially reviewed for formula accuracy and placement relevance
Last updated: 2026-06 • Data from university formula references and placement cutoff checks
Thapar Institute is based in Patiala and attracts students from across India. Students use this conversion for PPSC applications, PSU recruitment, and core engineering placements in Punjab.
Thapar Institute of Engineering and Technology (TIET), Patiala uses Cumulative Grade (CG), equivalent to CGPA at other universities. CG to percentage formula: Percentage = CG × 10. Example: 8.0 CG = 80%. For GATE eligibility (60%): minimum CG 6.0. Note: Thapar students must use 'CG' (not CGPA) in all official documents — it is Thapar's internal terminology. For PSU GATE recruitment (65%): minimum CG 6.5 at Thapar.
Common CGPA values and their percentage equivalents under the Thapar Institute of Engineering and Technology formula (CG × 10):
Scroll horizontally to see full table →
| CGPA | Percentage | Grade | Class |
|---|---|---|---|
| 10.0 | 100.00% | O | Distinction |
| 9.0 | 90.00% | O | Distinction |
| 8.5 | 85.00% | A+ | Distinction |
| 8.0 | 80.00% | A+ | Distinction |
| 7.5 | 75.00% | A | Distinction |
Thapar Institute of Engineering and Technology uses a 10-point CGPA grading system. Convert the final cumulative CGPA with CG × 10 when a form asks for percentage instead of grade points.
Your degree certificate class at Thapar Institute of Engineering and Technology is determined by the following percentage thresholds:
Scroll horizontally to see full table →
| Classification | Min Percentage | Min CGPA (CG × 10) |
|---|---|---|
| Distinction | 75% | 7.50 |
| First Class | 60% | 6.00 |
| Second Class | 55% | 5.50 |
| Pass Class | 50% | 5.00 |
The common TIET / Thapar mistake is using a generic CGPA shortcut instead of CG × 10. For example, 7.5 CGPA is 75.00% with this university formula.
Backlogs or supplementary papers do not change the TIET / Thapar conversion formula. Recruiters and government forms may still require all subjects to be cleared by the application or joining date.
TIET / Thapar students applying for GATE, PSU recruitment, UPSC, state PSC, banking, scholarships, or higher studies should use CG × 10 unless the notification specifies a different conversion rule.
Thapar Institute of Engineering and Technology uses Percentage = CG × 10. For example, 7.5 CGPA = 75.00%. The First Class threshold of 60% corresponds to CGPA 6.00 and above.
Using CG × 10, 60% = 6.00 CGPA at Thapar Institute of Engineering and Technology. Distinction (75%) requires CGPA 7.50 or above. Calculation: 60 ÷ CG × 10 = 6.00 (approx).
GATE general eligibility (55%) requires CGPA 5.50 at Thapar Institute of Engineering and Technology. PSU GATE recruitment — ONGC, NTPC, BHEL — requires 65% = CGPA 6.50. DRDO/ISRO posts require 60% = CGPA 6.00.
Contact the Thapar Institute of Engineering and Technology examination section or your college registrar. Submit a written request with your registration number, programme, and batch year. Ask them to cite the official formula: CG × 10.
At Thapar University, CG (Cumulative Grade) is the internal name for what other universities call CGPA. Both represent a weighted average grade point on a 10-point scale. The conversion formula is identical: Percentage = CG × 10. When filling GATE forms, PSU applications, or job applications that ask for CGPA, enter your Thapar CG value in the CGPA field. Students searching for 'thapar cg calculator' or 'cg calculator thapar' are looking for this tool.
Chandigarh University, LPU, and PTU use × 10. Thapar uses CG × 10 (same result, internal terminology is CG). HPTU uses × 9.5.
Students comparing Thapar Institute of Engineering and Technology's formula with nearby and similar universities also check:
A CGPA of 7.5 gives different percentages at different universities:
Scroll horizontally to see full table →
| University | Formula | 7.5 CGPA = | CGPA approx 60% |
|---|---|---|---|
| Thapar Institute of Engineering and Technologycurrent | CG × 10 | 75.00% | 6.00 |
| Chandigarh University | CGPA × 10 | 75.00% | 6.00 |
| Lovely Professional University | CGPA × 10 | 75.00% | 6.00 |
| IKG Punjab Technical University | CGPA × 10 | 75.00% | 6.00 |
| Himachal Pradesh Technical University | CGPA × 9.5 | 71.25% | 6.32 |
Under Thapar Institute of Engineering and Technology, the usual 60% benchmark is 6.0 CGPA. For the listed eligibility benchmark, the calculator maps 6.0 CGPA to 60.00%.
Once a month, we send updated CGPA formulas, new salary calculators, and real offer letter breakdowns from Indian IT and analytics companies.
No spam. Only real numbers and tools for confusing CGPA and CTC rules.
Our compensation and finance review can walk through variable pay, bonds, clawbacks, and hidden clauses so you know the number you can actually negotiate with.